Specma Hydraulic

2010-03-05

Component Division ställer ut på MaskinExpo

27-29 maj kl 9-17, Barkarby flygfält, Stockholm.
Specma Hydraulic Component Division och SlangSnabben ställer ut tillsammans på MaskinExpo,
hjärligt välkomna att besöka monter X44.



2010-02-24

Nya lösningar med positions switch från SUN Hydraulics (Sverige/Sweden)

Klicka här för mer info !

Klicka här om du vill bli kontaktad !

2010-02-24

Ny ventil från Walvoil - SDS180

Klicka här för mer info.

Klicka här om du vill bli kontaktad !

2009-11-08

Eatons 420 pump - Nu med Torque Control (Sverige/Sweden)

Eatons pumpserie 420 har nu kompletterats med en hydromekanisk torque control.

Det innebär att man kan till Eatons kompakta pump nu även kan få en kostnadseffektiv kontroll av maximalt effektuttag.

Läs mer genom att klicka här !

Vill du bli kontaktad angående Eatons 420-pump eller vårt övriga program - Klicka här !

2009-11-06

Nya väderskyddade magnetspolar från Sun Hydraulics (Sverige/Sweden)

Mer info !

Vill du bli kontaktad angående SUN Hydraulics program eller vårt övriga sortiment: Klicka här !

2009-11-06

Pumps with ATEX approval from ATOS (Suomi/Finland)

Subject: pumps with ATEX ex-proof certification

According to the ATEX Directive 94/9/CE, the components not subjected to electrical functions are not obliged to be certified by a Notified Body, being just requested from the manufacturer a technical analysis, proving the product’s compliance with the safety requirements. Anyhow, Atos decided to put in place the ATEX pumps certification to satisfy in advance the new requirements of the ex-proof market, achieving the ATEX certification Ex II 2/2 GD cbk IIC T6/T5 for pumps type PFEA and PVPCA, specific for applications in ex-proof hazardous classified areas

In combination with the pumps, Atos has also achieved the ATEX certification for CK cylinders, identified with code CKA, for which a specific communication will follows.

Pump Models

The pumps with ATEX certification are identified with "A" letter after the original model code:

- PFEA: certified version available for all PFE models

- PVPCA: certified version available for PVPC models with controls type C, CH, R, L, LW. Proportional control type CZ, LZQZ(R) and PERS are available on request.

Technical Characteristics

The pumps with ATEX certification are fully derived from standard versions. Beside the specific nameplate with the CE mark and certification references, they are provided with a proper screw terminal on the body for the ground facility.

ATEX certification references

The pumps are certified by TUV Notified Body, according to protection mode "cbk" (construction safety + ignition source + liquid immersion)

We point out that the certification covers both applications in Gas (Zone 1 and 2) and Dust (Zone 21 and 22) environments.

 In the mean time Atos ITEC department is available for any information you might require.

 In the mean time Atos ITEC department is available for any information you might require.

Note: Specific Operating and Maintenance instructions are always enclosed with delivered pumps. This documentation provides useful information about the pumps installation criteria, fluid compatibility, maintenance, repairing and storage cautions.

Specific Operating and Maintenance instructions are always enclosed with delivered pumps. This documentation provides useful information about the pumps installation criteria, fluid compatibility, maintenance, repairing and storage cautions.